i have this biasi 24s 1999 model combi keep blow blowing the 1.6amp fuse on pcb when replaced it will fire up for about 5 mins then blows again of late has been switching off occaisonaly having to press the read light trip button to get it back on im thinking may be pump problem and if any knows what type resistance should i get if checked with multimeter i would be very great full if any one could help
biasi 24s combi keeps blowing 1.6amp fuse on pcb
- Thread starter mickeymc
- Start date
Sponsored Links
Myson CP53 210 ohms salmson MYE30 220 ohms
Myson CP63 180 salmson MYL50 120
there was an Askol pump fitted , i think it was much later no data on that one ! Agile may well pick up on this post , he may well know or comfirm .
Myson CP63 180 salmson MYL50 120
there was an Askol pump fitted , i think it was much later no data on that one ! Agile may well pick up on this post , he may well know or comfirm .
It will not show up as a static resistance problem.
You need to power the pump externally from a 3A fuse and see what happens.
Alternatively you can try measuring the current taken by the pump but use a meter which cannot be damaged by an overlead.
The problem is that the overload occurs at random and can be 5-10 amps!
Askol pumps were used on a very few boilers about 2006. Many failed.
Tony
You need to power the pump externally from a 3A fuse and see what happens.
Alternatively you can try measuring the current taken by the pump but use a meter which cannot be damaged by an overlead.
The problem is that the overload occurs at random and can be 5-10 amps!
Askol pumps were used on a very few boilers about 2006. Many failed.
Tony
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
Similar threads
