biasi boiler pressure loss.

Joined
21 Dec 2008
Messages
2
Reaction score
0
Location
Wiltshire
Country
United Kingdom
Biasi
I have a biasi M96.24SM/B2 Combi that keeps losing pressure
I have no water leaks and the boiler works fine if i bring the pressure up
but it will go down from 1.2 bar to nothing in half an hour
I think i need help
 
Sponsored Links
have you noticed any leaks outside your house from the blow off discharge pipe.
 
Hi
No leaks from anyware
i shut all the rads off as well just to see if any air was escaping from any joints but all seam ok
Thanks
 
There MUST be a leak somewhere, Have you had the floorboards up and inspected all pipework :?:
 
Sponsored Links
Blow off pipe to outside: put a clear plastic bag over it held by elastic band - see if it fills with water when pressure drops.
 
Blow off pipe to outside: put a clear plastic bag over it held by elastic band - see if it fills with water when pressure drops.

From 1.2 bar to 0 in 1/2 an hour ,if it were the blow off i think it'd be a bit noticable what say you :?:
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top