I went to a house today to be told by the householder that the kitchen sockets hadn't worked since the kitchen fitter did some work on them. All I did was remove some gaffer tape from the back of the socket (it was already unscrewed and the wires were out of the terminals). This is what we found:
Also whil looking for the fuse box we stumbled upon this:
I hope the DNO never wants to replace the meter
We also found a socket wired in 1.5mm² spurred from the ring, spurs from spurs, the sheath from a 10mm² earth used as earth sleeving and much more besides.
Oh and guess what: The fitter was not Part P registered and issued no certificates. It shows why Part P is important, as much as it a pain in the a**e it might stop this sort of workmanship.
[/rant] I had a bad day
Also whil looking for the fuse box we stumbled upon this:
I hope the DNO never wants to replace the meter
We also found a socket wired in 1.5mm² spurred from the ring, spurs from spurs, the sheath from a 10mm² earth used as earth sleeving and much more besides.
Oh and guess what: The fitter was not Part P registered and issued no certificates. It shows why Part P is important, as much as it a pain in the a**e it might stop this sort of workmanship.
[/rant] I had a bad day