I have had a small problem with my boiler, it ran out of oil and I went out and bought two emergency tanks of oil and put them into my storage tank. I then tried to bleed the boiler and can not get any oil through the system. There is a Tiger Loop in the system as well. I have checked all the connections and I can not find any leaks at all. Has anybody any suggestions how to get it going until my oil delivery comes.
Bleeding Oil Boiler
- Thread starter KeithGinty
- Start date
Sponsored Links
Have you tried pressing the reset button a few times?
If you have no oil at all in the deaerator you have a problem, and you have to suck the oil through to the boiler. It wont flow on its own because there is a non return valve which needs a bit of pressure to open it.
If you have no oil at all in the deaerator you have a problem, and you have to suck the oil through to the boiler. It wont flow on its own because there is a non return valve which needs a bit of pressure to open it.
Would you advise I wait for the delivery of oil to build up a bit of pressure.
Sponsored Links
anybody know how to fix this
W
wilhelm
get some oil. like 100galleons will do.
and depending on wot burner you have got. you can draw the oil into deaerator and wham bam...
so what boiler/burner you got?
and depending on wot burner you have got. you can draw the oil into deaerator and wham bam...
so what boiler/burner you got?
W
wilhelm
jeeeeeeeeeez this wine is good im seeing double.......... 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links