- Joined
- 9 Aug 2004
- Messages
- 13
- Reaction score
- 0
- Country
Wonder if anyone can help.
We've had this WM for a couple of months, and it just doesn't seem to be right.
When on a full wash cycle it sometimes (maybe 50% of the time) stops when its got to the rinse part of the cycle.
The manual says this can be down to a kink in the inlet hose, we've pulled the machine out, and it isn't.
If we manually move the dial to a rinse program, it then rinses fine.
Also, don't know if this is connected, but it also usually leaves behind quite a lot of powder.
Any suggestions would be gratefully received.
Thanks
We've had this WM for a couple of months, and it just doesn't seem to be right.
When on a full wash cycle it sometimes (maybe 50% of the time) stops when its got to the rinse part of the cycle.
The manual says this can be down to a kink in the inlet hose, we've pulled the machine out, and it isn't.
If we manually move the dial to a rinse program, it then rinses fine.
Also, don't know if this is connected, but it also usually leaves behind quite a lot of powder.
Any suggestions would be gratefully received.
Thanks
