Bristol heating engineer
- Thread starter pasty-man
- Start date
Sponsored Links
If you want it done properly then find Chrus Hutt !
There is more work moving a boiler than fitting it as a replacement.
We charge £840 plus the cost of the boiler to fit one!
I dont know what Chris charges.
There may still be some unregistered East European workers left if you want a cheap illegal job although most have left the UK for greener pastures!
Tony
There is more work moving a boiler than fitting it as a replacement.
We charge £840 plus the cost of the boiler to fit one!
I dont know what Chris charges.
There may still be some unregistered East European workers left if you want a cheap illegal job although most have left the UK for greener pastures!
Tony
surely you could get a local recommendation.
Sponsored Links
space - you'd think so eh?
First one was referred as 'good but might be busy' - arranged a date, never turned up. No answer
Second one - arranged date (tonight) , didnt even bother to call when late - rang him to be told he had another job to do yet etc etc will call me later to rearrange. No call
To be honest it really makes me want to do it myself. At least I'm going to do it right! pretty! and properly! I'm just not a corgi guy,
****es me off.
What you reckon time wise.
Drain down, disconnect boiler, remove, drill holes, extend piping, install & reconnect, new flue - core drill(I reckon) inc Install conden waste (shorten - no issue), service, commission etc.
Not my day job but I reckon I would give it 3/4 day. A few cuppas as well.
Opinions?
First one was referred as 'good but might be busy' - arranged a date, never turned up. No answer
Second one - arranged date (tonight) , didnt even bother to call when late - rang him to be told he had another job to do yet etc etc will call me later to rearrange. No call
To be honest it really makes me want to do it myself. At least I'm going to do it right! pretty! and properly! I'm just not a corgi guy,
****es me off.
What you reckon time wise.
Drain down, disconnect boiler, remove, drill holes, extend piping, install & reconnect, new flue - core drill(I reckon) inc Install conden waste (shorten - no issue), service, commission etc.
Not my day job but I reckon I would give it 3/4 day. A few cuppas as well.
Opinions?
i've not seen the job but sounds like max day1/2 + materials.
at an absolute max i recon i could equal Agiles price even taking into account 1 hr traveling from here.
at an absolute max i recon i could equal Agiles price even taking into account 1 hr traveling from here.
Well I'm gonna fit an Alpha boiler tomorrow for nothing so there.
as Harry Enfield said
"You don't wanna do it like that"
sorry, dont get the Simpsons reference
i'm getting worried about this site.
not a good idea to post address, that'll be removed.
expect the call.
pasty-'man' oh err
not a good idea to post address, that'll be removed.
expect the call.
pasty-'man' oh err
any way email doesn't work.
is a 't' missing ?
try a personal message.
is a 't' missing ?
try a personal message.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links