Burglar Alarm Contact Switch Wiring

[Gibbo300666]

Hi All - I am changing a burglar alarm pir to a magnetic contact switch. The contact switch has 3 silver screw terminals called 'Contact Circuit' and 2 brass screw terminals called 'EOL or Tamper'. What wire do I connect to what terminal, I have black and red (power), white and yellow (relay) and blue and green (tamper). I have tried numerous combinations without success. Thanks in anticipation of your assistance. [/b]

 

[Alarm]

The brass ones are the alarm circuit.
Silver use to tie a pair together for a tamper circuit.

 

[Gibbo300666]

The brass ones are the alarm circuit.
Silver use to tie a pair together for a tamper circuit.

Thanks for your help.
Does that mean red and black (power) go to the brass screws and the blue and green (tamper) go to the silver?

 

[Alarm]

NO

No power needed for a contact.
White and Yellow for the brass screws.
Twist blue and green together and put under a silver screw.

DISCONNECT at the panel the red and black.
It is not needed.