Capping water pip

[Bobharford]

Hi
My daughter is having a kitchen fitted by Magnet. She has paid for installation.
Day before they have told her that old kitchen has to be removed- first mention of this to her. So demolition OK But the sink has to come out It is copper supply pipe to a flexi pipes which connects to the taps. Looking at a photo she sent me I cant see a shut of valve on the pipes. So after disconnecting the Flexis will need to cap the copper pipe temporarily for new sink to go in. Is there a fitting available? I cant solder and anyway don't want to seal it permanently.
Have to say, since they had the deposit Magnet have been useless and rude. ( I know fitters are contractors so not knocking them.)
Advice appreciated
thanks

 

[RandomGrinch]

Sometimes there are isolation valves on the flexi's.

If not, you can use something like:
https://www.screwfix.com/p/jg-speedfit-15esotp-emergency-shut-off-tap-15mm/13133
Or just plain 15mm pushfit stop ends:
https://www.screwfix.com/p/jg-speedfit-plastic-push-fit-stop-end-10mm/39981

If you could post the picture, that may also help

 

[kidgreen61]

As it's a temporary fix, just pop a couple of Speedfit stop ends on the pipes.

 

[Bobharford]

Thanks !