Ceiling Fan with Light

[bertram_wooster]

I have bought myself a Ceiling Fan with Light from Homebase and cannot make any sense of the wiring diagram
Here it the wiring diagram for my new Homebase Fan:

I have this wiring in place before I start anything:

I can't make head nor tail of what homebase are asking me to do in their diagram.

Any ideas?

 

[RF Lighting]

You should disregard the loop connector.

 

[Steve]

bertram_wooster, do you actually have a ceiling rose? if so,

connect the 3 reds to the "loop"
connect the black from the switch to the 2 "switched live" terms
connect the other blacks to the neutral terminal
connect the earths to the earth terminal . . of course.

OR you could copy RF's diagram, by putting the ceiling rose in the loft run 3 core flex down to the light.

 

[Job_n_knock]

The purpose of the 2 switched lives is to provide you with a method of seperate switching on the wall if you so wish otherwise as RF has shown, link across from the same feed.

 

[RF Lighting]

Just noticed, on the loop in diagram posted by bertram_wooster, the black switch wire doesn't have and red sleeving or tape on it, which it must have.

 

[bertram_wooster]

THANK YOU EVERYONE!

It's up and running!