Hi, I am hoping someone can help. I have had to change the light switches in my hall and landing as after 25 years the switches were loose and one fell off. I purchased 2 new ones, wrote down where all the wires were on the old switches and then put them in the same place but now I can only get the hall and the bathroom light to work. Least I didnt short anything. They are both 3 gang 2 way switches. downstairs left to right is outside light (disconnected so dont know if that would work) hall light and then 2way switch for landing and upstairs left to right is bathroom extractor fan (this is now bathroom light and works) middle was bathroom light but does nothing now and end was 2way for landing light (doesnt work). The back of the old switch looks different to the new ones and I have read some posts but I dont really understand how to convert the wires and dont want to just start messing moving wires round on a guess so am hoping some one can tell me how to resolve as i cant really afford to have to get an electrician out for this but I need to get the landing light working for the kids on a night. I have added pictures of whats in place now.
Changing Light Socket Issues
- Thread starter col11
- Start date
Sponsored Links
Sponsored Links
Top row 1 2 -- COM --1 2
Bot row COM - 1 2 -- COM
Bot row COM - 1 2 -- COM
Can you post a pic of note showing previous layout?
ok so putting the wires in the same holes should have worked as my new one has the same layout, just has L22 for example where the old one has L2. So clearly I have messed up somewhere either when writing down where the wires go or have put something back in the wrong place. 
Is there anything obvious you can see from the pictures I posted? if not any guidance on what should go where? or am i going to have to live with no landing light until I can save up for an electrician to come an sort it . I replaced all the covers on the single light switches and plug sockets in the house with no issues and was dead proud of myself but clearly a 3 gang 2 way has beat me.
Is there anything obvious you can see from the pictures I posted? if not any guidance on what should go where? or am i going to have to live with no landing light until I can save up for an electrician to come an sort it . I replaced all the covers on the single light switches and plug sockets in the house with no issues and was dead proud of myself but clearly a 3 gang 2 way has beat me.
The first digit, after the L, in the L22, the 2 in the middle, denote the switch number. Your new one, will be L1? for switch 1, L2 for switch 2, L3 for switch 3. Rest of the terminals, will follow the same convention, COM1, COM2, and COM3
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
