Changing timing of alarm zone?

[sobeitjedi]

Hi.

I have a Concept 6 alarm. This is the manual: https://dl.dropbox.com/u/13482539/Alarm.pdf

At the moment, when I walk into a particular zone (Zone 3 I think), the alarm sounds immediately. How can I modify the system so this zone gives me some time to get to the alarm panel before sounding?

 

[EightyTwo]

You can't! Only zone 1 can be used to start the entry timer. However, if you omit a zone (say, when you set it at night), Zone 2 will start the entry timer too. Zone 3 is immediate unless you program it as Timed (it is ignored during the entry time, a.k.a. Entry route).

Typically, you'd have Z1 on the front door, Z2 in the hall.

It's all in the book...