i have a zanussi jet 1000 and it has a drawer with max on the r/h/s.for conditioner but it is always full of water is this right is this to mix water with cond.
frank
Most likely the compartment outlet (which is probably two plastic tubes overlapping each other) is clogged. This often happens, sometimes with old fabsoft but more often when people put soap powder in the conditioner compartment. Take the drawer out and scrub it in hot water. look carefully at how the conditioner compartment comes apart. Scrub out the slot where the drawer goes into as well. If you see black mildew, spray it with Kitchen Cleaner with Bleach before you scrub. a nylon-bristled washing-up brush is handy here. Rinse well and give it a HOT wash with no powder or laundry to clear away the congealed old sludge.
If the dispenser is that bad then it's likely the tub is bad too.
1 aerial tablet into the drum and hottest wash with no laundry will help. It has a high bleach content which helps kill the bacteria.
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local
