Connect dpm to dpc in garage conversion

[b123b]

Hello

In my garage conversion , I can see the dpc. But it's trimmed against the wall .

How do I connect the dpm to it before pouring screed/concrete ?

Do I just paint blackjack all around the wall under and over the dpc and then run up dpm and overlap it ?

Thanks

 

[Wayners]

Your current wall is above dmp? So no damp anyway. Wall and floor is dry.
What about insulation on floor?

 

[b123b]

There will be insulation under the floor . I will run the DPM up the wall and past the DPC. It seems maybe better not to seal it and trim the dpm at screed level . I will just need to make sure plasterboard is 25mm off floor level. So there is ventilation if there is actually any damp rising.