Connecting an oil fired boiler into an existing system

[lotus3692]

I have just had installed a Charnwood 16B Multifuel boiler installed, its running 6 radiators of approx 20,000 Btu's & domestic hot water.

Its the first time I have ever used this type of boiler as my last was a gas combi, now we are in a rural village with no gas.

I am a little disappointed in the time it takes for the radiators to warm up, I knew it wouldn't be instant & it might get better with practice & experimenting with different types of fuels, but I am looking at the worst case scenario of now installing an oil fired boiler.

I would like to know if it is possible to have the oil fired boiler & the multifuel system running in tandem with a control system kicking in the oil system once the fire burned out or the water temp dropped ?

Would really appreciate any advice on this.

Thanks

Chris

 

[Dan Robinson]

try this:


http://www.dunsleyheat.co.uk/neutralizerpics.htm

 

[lotus3692]

Thanks Dan.

Aswell as this system I have also found another system which looks like it might do a similar job:

http://www.h2panel.co.uk/h2index.htm

I would be appreciate any information if anybody has any experience with either system.

Thanks again.