converting to socket outlets

[craig1]

Hello,

Have several storage heater connections which are currently not

being used any longer. As the outlets are all on seperate 16A radials

I take it the circuits would be suitable as socket outlets.

My only concern is how to by pass the Economy 7 ?


Thanks!

 

[Adam_151]

Disconnect them from the E7 board and connect them to spare ways in the normal board. A better way of doing it would be to disconnect the board from the e7 tails and henley it in with the normal tails, but that involves cutting seals, pulling main fuses and playing with tails...

 

[Steve]

. . . playing with tails...

do that a lot, do you adam?

 

[andy]

Disconnect them from the E7 board and connect them to spare ways in the normal board. A better way of doing it would be to disconnect the board from the e7 tails and henley it in with the normal tails, but that involves cutting seals, pulling main fuses and playing with tails...

unless you already have isolators fitted

 

[craig1]

Cheers!

Thanks for the info.