Corgi and boiler size

[johno12345]

Hi,

I have a 63.2Kw boiler which has broken down again. It seems to be the thermocouple as the pilot light wont light. It is all singed and loose where it fastens on.

I have been led to believe that a standard corgi card isnt enough and the engineer needs a higher level of corgi. When I look at his corgi card, what should I be seeing to show whether he can work on the boiler?

Thanks

 

[Gaaz]

Is that 63.2Kw INPUT or OUTPUT?

 

[johno12345]

Input, I think the output is about 40% less I can go and check if it is necessary

 

[gasacs]

Standard CEN1 qualification is up to 70Kw net heat input as that is what he BS 6898 covers.
Anything larger would be classesd as non - domestic.

If in doubt phone CORGI for guidance

 

[johno12345]

so anyone with a corgi card with domestic boilers on their card should be fine.

Thanks