Craptree mcb to RCBO? lol

[SP4RKZ]

I know this is a long shot.
Is it at all possible to get an rcbo that has design to fit the din rail and busbar of a sb6000 type 1 crabtree mcb??

Otherwise i'll just put up an additional small RCD board to cover this particular circuit.

Let me know thanks

 

[flameport]

No way.
Even finding replacement MCBs is difficult.

 

[securespark]

MCB's are here:

http://www.thefusecompany.com/fuse.php?products_id=392

Might be worth contacting them to see if they can source an RCBO.

 

[Click-Sure]

They never did RCBO's for the SB6000.

Had this confirmed by 2 Crabtree reps.

Suggest you install a seperate RCCB adjacent the existing unit, had the exact same incident myself a couple of weeks ago.

 

[SP4RKZ]

They never did RCBO's for the SB6000.

Had this confirmed by 2 Crabtree reps.

Suggest you install a seperate RCCB adjacent the existing unit, had the exact same incident myself a couple of weeks ago.

i was going to go for one of those 2 way units protected by RCD mainswitch as the client doesn't want something that costs too much in material and labour.

And replacing the fuseboard will cost him arm and leg as there's a lot of mimms cable