I have just installed a Reece curved shower base and as a new drain had to be installed its sitting on a base with a 40mm gap to the floor.
I need to fill this gap with some trimmed spare floor tiles.
So here's the dilemma, do I cut the tiles the same size to start and then make them smaller to make the curve, or use smaller size pieces all the way so they are all the same length?
Thanks in anticipation.
I need to fill this gap with some trimmed spare floor tiles.
So here's the dilemma, do I cut the tiles the same size to start and then make them smaller to make the curve, or use smaller size pieces all the way so they are all the same length?
Thanks in anticipation.
