Hi guys i wonder if anyone can give me any advice on my problem
I have a danfoss tp5000 wireless stat with rx1 receiver and all of a sudden it doesnt seem to be functioning correctly
Heres whats happening
I run the stat in thermostat mode say at 18C the display functions correctly and the burner symbol shows up
i hear the rx1 click and the ch1 lights up red as it should
But the problem is that thats all that happens the boiler doesnt fire
If i then press the ch1 button on the rx1 the boiler fires and functions as it did before
Ive tried the usual of changing batteries and re syncing the two devices together but its still the same
On a sidenote iv also noticed that i am unable to bring the stat out out thermostate mode i dont know if this is connected
Any help guys would be appreciated cheers
I have a danfoss tp5000 wireless stat with rx1 receiver and all of a sudden it doesnt seem to be functioning correctly
Heres whats happening
I run the stat in thermostat mode say at 18C the display functions correctly and the burner symbol shows up
i hear the rx1 click and the ch1 lights up red as it should
But the problem is that thats all that happens the boiler doesnt fire
If i then press the ch1 button on the rx1 the boiler fires and functions as it did before
Ive tried the usual of changing batteries and re syncing the two devices together but its still the same
On a sidenote iv also noticed that i am unable to bring the stat out out thermostate mode i dont know if this is connected
Any help guys would be appreciated cheers
