Dimplex Burgate Problems

[majorwally]

Hi guys.
My Dimplex Burgate has stopped working. Previously this meant buying a cheaper transducer off amazon which always worked. Didn't work this time. On inspection I noticed that the fan wasn't working and the low voltage connectors looked iffy, so changed them to basic plastic ones. Probably a mistake as the wiring is very fragile and I can't get the screws in the connectors to bite onto the fan wires. Any ideas?

 

[trojanhawrs]

Pictures would help. What makes you think it's "low voltage"? I'm assuming by "basic plastic ones" you mean terminal block.
Use a smaller terminal block or strip back more insulation and double back on itself as many times as necessary. Of course, there's no guarantee that's the problem.

 

[ericmark]

The instructions do say "low voltage" but I would as @trojanhawrs says would question if really low voltage (50 - 1000 volt AC) or if extra low voltage (under 50 volt AC) I note the bulbs are 12 volt, so I think it may be extra low voltage, all but it seems USA call under 50 volt extra low voltage, but seen may an extra low voltage device called low voltage.

But think it will get harder and harder to get the bulbs, so is it worth repairing?