Our Diplomat dishwasher about 18 months old is showing an F7 fault while the right hand L.E.D. flashes and a warning beep is heard.
When starting a cycle the machine appears to be draining then, for a couple of seconds only, water flows in before stopping so I think that the inlet valve is working initially but then cuts out. Thats when the beeping etc starts and the cycle stops.
I think the water flow in is ok and the large tubular filter inside, is clean.
At this point I have'nt got a clue and because its integral and with my arthritus quite difficult to get out of its housing, I am hoping some kind soul can suggest a possible answer to F7 before I start probing and hoping.
Thanks.
Peete.
When starting a cycle the machine appears to be draining then, for a couple of seconds only, water flows in before stopping so I think that the inlet valve is working initially but then cuts out. Thats when the beeping etc starts and the cycle stops.
I think the water flow in is ok and the large tubular filter inside, is clean.
At this point I have'nt got a clue and because its integral and with my arthritus quite difficult to get out of its housing, I am hoping some kind soul can suggest a possible answer to F7 before I start probing and hoping.
Thanks.
Peete.