Disconnect dishwasher - how to block off pipes under sink?

[OasisFan79]

We're going to be moving house soon. I've been looking at the dishwasher pipes under the sink in the kitchen and I was wondering what I would need to attach to the pipe connections when I disconnect the dishwasher's water and waste pipes.

The water pipe from the dishwasher (pictured below) screws on to the pipework under the sink. Is there a stop cap that you can buy which will screw on where the dishwasher water pipe currently connects?

The waste pipe (also pictured below) connects under the sink to the pre-existing plastic waste piping. Is there a stop cap or something that you can buy to block this off after the dishwasher waste pipe is disconnected?

Thanks for your help.

Dishwasher Water Pipe:


Dishwasher Waste Pipe:

 

[Newboy]

One of these for the waste pipe connection

http://www.mcalpineplumbing.com/traps/domestic-appliance-accessories/1-x-135-deg-nozzle.html

and a 3/4 blank nut for the water supply (with a washer)

 

[OasisFan79]

That's great thanks very much.

 

[OasisFan79]

Unfortunately the waste pipe connector part is too small - the connector that the dishwasher waste connects to (the bit that screws in) is much bigger.

I think we need a blanking cap or something that will screw on to the waste pipe connector. Does anyone know if you can get these?