Dishwasher makes humming noise and will not cycle
- Thread starter devlinj69
- Start date
Sponsored Links
Hi. I have had the humming noise with our Zanussi and it was caused by the water inlet having crap on the inlet side of the water supply this stopped the machine from being able to move the cycle on and all we got was a humming noise if the cycle dosen't start this could mean that the element does not get hot because the cycle can't move on to the heating position. Hope this helps if i'm wrong I'm sorry. Bill.
has the machine overfilled at any point?
some machines have a float switch in the base, and if the machine over fills, maybe due to it not emptying properly the float switch is activated, its basically a fail safe to protect the motat ect from shorting out in the water, and to stop you getitng electrocuted.
some machines have a float switch in the base, and if the machine over fills, maybe due to it not emptying properly the float switch is activated, its basically a fail safe to protect the motat ect from shorting out in the water, and to stop you getitng electrocuted.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
