DISHWASHER NOT DRAINING

[jojobetty]

Started playing up with the timer getting stuck on a program, corrected itself for a couple of months. Then last week when I opened it at the end of the cycle it hadnt drained the water away. (looked very murky white, as if there was lots of salt there) The bottom of the dishwasher was full to the door opening (high enough for water to overflow when door was opened/closed). Have checked hoses for kinks etc., washed filters and done all the obvious. Any ideas appreciated.
Its a Neff I cannot see which model. Thanks

 

[Sleepyhead]

Check your drain hose for blockage. If it's on a spigot under the sink, check that too.
The model number is engraved/etched on the top of the door, open the door and it should be in the centre.