dishwasher poor spray

[timluton]

Hi

I have got a integrated Tecnik / Bosch dishwasher SE6TIE2 GB/74. The heater unit packed up and the water was not heating at all. I replaced the heater;

http://www.espares.co.uk/product/es...eous-water-heating-element?SearchTerm=483058.

The water now heats up perfectly well but I have noticed that both spray arms have water coming through them but not enough for them to move. I have read other posts which suggest adding more water which has not worked. I have also read that the water heater unit could have something to do with it? I used the repairclinic.com video to show me how to replace the unit.

Any suggestions would be very welcome.

Tim

 

[JohnD]

how many of the filters did you clean?

 

[timluton]

Thanks for the quick reply.

I've cleaned the filters in the sump, cleaned the arms and checked the sump pump is free from debris. Are there other filters I need to check?

As I had changed the heater I was wondering if there was something that I could have done which has caused this problem, as it was ok prior to the heater fault.

Thanks

 

[assuhors]

Part of the heater unit is the diverter which alternates water between top and bottom spray arms,did you reconnect it.

 

[timluton]

How strange......I was just updating my post to say that I didn't connect the lead that operates the water flow and I have just seen your post! So yep you are right, thanks very much!