I have a Whirlpool Dishwasher model no. DWF 413 Type 12137. 999929030538. It is approx 5yrs old & a fully intergrated unit.
that was constantly running (water just swishing around)for over 2 hrs! before we switched it off. This stopped it in the middle of its cycle. There was some dirty water in the bottom. I did notice that the internal filters were dirty, so I removed & cleaned them. Also cleaned the upper & lower spray arms. According to the manual, I should leave the door adjar for at least 1 min before continuing the cycle. I have done this but there is nothing happening. The lights are on to cycle. Is it blocked further in the drain pipe? if so how do I unblock this without disturbing the dishwasher?
that was constantly running (water just swishing around)for over 2 hrs! before we switched it off. This stopped it in the middle of its cycle. There was some dirty water in the bottom. I did notice that the internal filters were dirty, so I removed & cleaned them. Also cleaned the upper & lower spray arms. According to the manual, I should leave the door adjar for at least 1 min before continuing the cycle. I have done this but there is nothing happening. The lights are on to cycle. Is it blocked further in the drain pipe? if so how do I unblock this without disturbing the dishwasher?