I need to get some worktop for an open plan kitchen. One side is open to the lounge , approx 2.2M of counter is double sided. Behind the floor units on the longe side is some panelling which will finish of the back of the units, with the worktop fitted over the panelling -Unfortunately this means the worktop needs to be minimum 650mm but could go up to 700mm wide.
Alternate would be to fit a 50mm wooden edge on the lounge side.
I am looking for laminate worktop - nothing too special - custom made worktop seems to run into hundreds of pounds. Any suggestions welcome.
Alternate would be to fit a 50mm wooden edge on the lounge side.
I am looking for laminate worktop - nothing too special - custom made worktop seems to run into hundreds of pounds. Any suggestions welcome.