W
wkdhd
Moving the outlet hose on the dishwasher from a standpipe to a spigot so it actually fits under the worktop. The end of the drain hose doesn't have a rubber connector so I found these http://www.diy.com/departments/plumbing/hoses-appliance-plumbing/outlets/DIY586094.cat . One is 19mm and one 22mm. Is that the end that goes over the spigot or the one that goes into the corrugated pipe? Also how does the connector attach to the corrugated? Is it ok just to screw it in with a smear of sealant?
