FROM A COMPLETE NOVICE! HOW EASY IS IT TO CHANGE THE DRAIN HOSE AT THE BACK OF A DISHWASHER? I HAVE SPRUNG A LEAK IN THE ORIGINAL ONE( A KNIFE FELL DOWN THE BACK!! )AND I DON\\\'T WANT TO WAST MONEY ON A PLUMBER IF IT IS STRAIGHT FORWARD
DRAIN HOSE
- Thread starter NEILG
- Start date
Sponsored Links
Four easy steps:
1) Look at old hose and see if it is grey plastic convoluted one about 30mm in diameter. Measure its length.
2) Go to DIY shop or Spares shop and buy a new one of the same length
3) Pull out machine and fit new hose same way as old
4) Press here
1) Look at old hose and see if it is grey plastic convoluted one about 30mm in diameter. Measure its length.
2) Go to DIY shop or Spares shop and buy a new one of the same length
3) Pull out machine and fit new hose same way as old
4) Press here
JohnD said:Four easy steps:
1) Look at old hose and see if it is grey plastic convoluted one about 30mm in diameter. Measure its length.
2) Go to DIY shop or Spares shop and buy a new one of the same length
3) Pull out machine and fit new hose same way as old
4) Press here
THANKS FOR THAT I WILL GIVE IT A TRY. DOES'NT SOUND TO HARD!!
Sponsored Links
Very sorry won't happen again.Thanks for your help.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
