I am wanting to replace a Satchwell TLX2284 thermostat with a Drayton 30002 & am somewhat confused re the wiring.
The satchwell has 4 wires yellow/red/blue/earth.
I have wired the drayton as follows:
yellow..... ON
red......... COM
blue....... N
Leaving the Off connection empty.
My problem is :
The digistat appears to switch on/off with the temp as required,
however, when the system is switched off on the timer/controller, for some reason the heating comes on at a very low setting.
Should i be connecting something to the 'Off' connection ???.
Any assistance would be greatly appreciated.
The satchwell has 4 wires yellow/red/blue/earth.
I have wired the drayton as follows:
yellow..... ON
red......... COM
blue....... N
Leaving the Off connection empty.
My problem is :
The digistat appears to switch on/off with the temp as required,
however, when the system is switched off on the timer/controller, for some reason the heating comes on at a very low setting.
Should i be connecting something to the 'Off' connection ???.
Any assistance would be greatly appreciated.
