Dry Verges - Retro fit

Joined
28 Aug 2020
Messages
7
Reaction score
0
Country
United Kingdom
Hi Guys

I am new here and wanted to get your thoughts.
I have had retrofitted dry verge caps on my 1970s detached house in Leicester by a roofer.
The tiles are Double Romans and the caps are manufactured by Timloc.
The roofer has not nailed the caps into the battens/beans however in to the Gable with a screw. I have noticed that the old mortar is still in place.

This was all installed in May and it looked fine. It is now August and we had started to have some wind and recently windy weather measuring 40 mph (i think).

I have noticed that the end caps are coming off or do not hug the tiles tight.

Any ideas on what i should do next?

thanks
 

Attachments

  • WhatsApp Image 2020-08-28 at 00.09.11 (1).jpeg
    WhatsApp Image 2020-08-28 at 00.09.11 (1).jpeg
    86.5 KB · Views: 431
  • WhatsApp Image 2020-08-28 at 00.09.11 (2).jpeg
    WhatsApp Image 2020-08-28 at 00.09.11 (2).jpeg
    104.6 KB · Views: 359
  • WhatsApp Image 2020-08-28 at 00.09.11 (3).jpeg
    WhatsApp Image 2020-08-28 at 00.09.11 (3).jpeg
    90.9 KB · Views: 374
  • WhatsApp Image 2020-08-28 at 00.09.11 (4).jpeg
    WhatsApp Image 2020-08-28 at 00.09.11 (4).jpeg
    172.6 KB · Views: 500
  • WhatsApp Image 2020-08-28 at 00.09.11.jpeg
    WhatsApp Image 2020-08-28 at 00.09.11.jpeg
    107.8 KB · Views: 355
Sponsored Links
Get this 'roofer' back to do the job properly (maybe download the manufacturers instructions/guidance so you know how they should be fitted).
If he doesn't want to know, or wants paying to sort it out send him a letter before action, if that doesn't wake him up then small claims.
We haven't had any exceptional weather since May so he can't hide behind that (unless you've had a typhoon), roof work should last 10 years plus if done properly.
 
Hi
Thanks for your reply.

Do you know what has been done right/wrong so that i can look out for the points to discuss.
 
In detail no but they've obviously not been secured to the roof structure properly, if they had then they wouldn't be falling off
I've just checked mfr instructions and they are quite specific about batten centres and nailing each section to batten end or counterbatten. Screws instead of nails should be fine if they used enough & if they are into something solid.
Link for you https://www.timloc.co.uk/uploads/files/Dry_Fix_Verge_System_8pp_Fixing_Instructions.pdf
 
Sponsored Links
I have had retrofitted dry verge caps

Not excusing the roofer as it is a poor job but it'll never be correct fitting them over an existing verge.

Verge tiles and old cement pointing need removed, then battens checked/repaired and tiles refitted with dry verges from the bottom up.
 
Fascias no ... is theres something wrong with them
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top