I'm thinking of switching from a gas cooker to a gas hob and electric oven (Electrolux EOC6630). All I have is an ordinary 15amp circuit in the kitchen. Will I need to install a 30amp supply or can I plug them into the existing circuitry.
Providing the oven is lesss than 3kw, you will be able to plug it in, but there will not be much capacity left on the circuit for anything else, for example, you couldn't cook a chicken and boil the kettle at the same time.
What is the rating of your oven?, then you can be advised of the most appropiate way to proceed
My PP doc mentions not porches as notifiable. Am I missing something?
As I understand it, lighting attached to the house, even outside lighting is non-notifiable as long as cables do not traverse gardens to reach their destination.
I'm thinking of switching from a gas cooker to a gas hob and electric oven (Electrolux EOC6630). All I have is an ordinary 15amp circuit in the kitchen. Will I need to install a 30amp supply or can I plug them into the existing circuitry.
The "Electrolux EOC6630" Is a 3kw oven, So You Have Two Options:-
1) Install a New 30a Ring Circuit In The Kitchen, So You Can Plug The Oven Into a Socket, And Have Capacity Left For Other Appliances, (ie Kettle, Fridge, Toaster Etc)
2) Install a New Dedicated 15a/20a Radial Circuit For The New Oven,
If you need to find a tradesperson to get your job done, please try our local search below,
or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Please select a service and enter a location to continue...
Are you a trade or supplier? You can create your listing free at DIYnot Local