Boiler has started to fail to fire intermittantly on CH and DHW demand. During last fail/ downtime did various checks/ inspections but did not find anything untoward. When in fail mode it may eventually fire but only after 2-5 mins of running tap seems less cooperative with CH demand but will fire if not watched!!!
Ferroli optima 701 9739L50024
- Thread starter northern-monkey
- Start date
Sponsored Links
most probable cause is the air pressure switch.
open the pcb compartment to find a piece of paper folded up and shoved under the transformer. it's a handy little fault finding guide based on the leds on the pcb.
open the pcb compartment to find a piece of paper folded up and shoved under the transformer. it's a handy little fault finding guide based on the leds on the pcb.
Yippee, investigated the air switch, noted the position of the adjustment screw and then adjusted slightly in both directions and, hey presto, the boiler is now functioning normally. Thanks for your help. 
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
