FITTING DOUBLE GLAZED UNITS

[AnonymousImport]

I am building a conservatory and I am putting double glazed toughened units in, can you tell me how to do it i.e do I put the glass in first then the sealer round the edge or do i put the sealer in first? and does it go in front of the glass or at the side only?

 

[DAZB]

you put a bead of sealant about 5 mm wide all the way around the inside of the frame and then you push your unit into it so it is making contact with the face of your glass.Don't worry if some squirts out the sides at the front , just let it set and it will come off.You may want to put slightly more at the bottom of each unit as this is the part that will receive the most water so let it squash out and clean off after.