Fitting shower door with plastic shower wall panels

[andyste]

I'm planning to install those plastic shower panels in my shower alcove, but have been wondering how I go about fitting the door, in particular how to get the door frame tight up on the wall without tightening the screws too much, which I imagine will crumple the plastic panel. Am I worrying unnecessarily?

Also, I was hoping to fit a frameless shower doo, but think I might be safer sticking to one with a frame as the horizontal would provide bracing from one wall to the other, rather than a frameless "pillar" that would be taking the entire weight of the door.

 

[foxhole]

You should use the solid shower panels the hollow stuff is not suitable for showers.

 

[andyste]

You should use the solid shower panels the hollow stuff is not suitable for showers.

Really? Virtually every cladding manufacturer and retailer markets them as "shower panels".

 

[foxhole]

You should use the solid shower panels the hollow stuff is not suitable for showers.

Really? Virtually every cladding manufacturer and retailer markets them as "shower panels".

Do you have a link?

 

[Newboy]

Page 378 on attached link

http://www.eastbrooktrade.com/images/EB-Catalogue-Web-26-Nov--14.aspx