flat roof

[tony_m]

I was thinking on DiYing a 3 layer partialy bonded Built up roof system using cold applied adhesive.
I am basically looking for a manufacturer which can supply fitting instructions and the products needed, something like kit or system. Have tried the Marley site but can't find a reference to flat roof materials.
Its for a warm roof with a sub 15 degree fall.

 

[Nige F]

Try Wickes diy shed

 

[nstreet]

I recently laid a new roof using the Rapidseal product from Marley. Got it from B&Q. It all went very well, no leaks yet.

Here's the link you need. http://www.marleywaterproofing.com/pages/products/productinfo.html

 

[tony_m]

Was the marley roofing a torch on type or a cold bond. Or did it come with instructions on laying?

 

[nstreet]

Was the marley roofing a torch on type or a cold bond. Or did it come with instructions on laying?

Its a cold bond product, instructions are available on the net via the link i gave and on the packaging. Lots of other similar resources on the net for laying DIY flat roofs.

 

[Nige F]

Thanks nstreet....I`d only seen the Wickes one.got to do my garage this summer

 

[tony_m]

Thanks N street. I glanced at the website so didn't see the fitting instructs. I must admit I have been unlucky in finding specific fitting advice on the net.

 

[tony_m]

Thanks N street. I glanced through the website so didn't see the fitting instructions. I have found plenty of info on details i.e forming welts etc. The information I cannot seem to find ,when looking at manufacturers websites, is what product goes with what and how they are fixed together as they seem to produce dozens of different products bonded in several ways. I am trying to get the combination of materials that a pro might use, so if there are any proffesional roofers that want to tell me what they would use for a three layer felt flat roof covering which would be fixed to 18mm ply on a warm roof I would be gratefull.

 

[tony_m]

double posting