My situation is this. I have a 1930's home and the Kitchen floor is the old Quarry Tiles laid on sand. No damp membrane. In the past I have applied a few coats of PVA and successfully prevented any damp on the surface of the floor. I now want to level the floor with laying a laminate floor in mind. But, over the years the center of the floor has sunk up to approx 30mm. Has any one any success in using floor self leveling screeds and if so any tips please? Thanks Mark
Floor Self Leveling Screed over Quarry Tiled Floor.
- Thread starter laceymh
- Start date
Sponsored Links
Speak to http://www.f-ball.co.uk/technical_support.asp
I would imagine you will need a liquid dpm, primer and then screed over the whole floor area.
I would imagine you will need a liquid dpm, primer and then screed over the whole floor area.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
