Flue change

[soundant]

Hello all,

I currently have a Biasi (Advance Plus 30C 30kW Combi Boiler ERP) boiler with standard
Horizontal flue fitted to a ground floor room on an external bog standard cavity wall.

I would like to try and get rid of some or all of the smell from the flue that is currently at a 7 foot height on the outside wall. Is it possible to turn through 90deg and have the flue outlet higher up the wall?

Many thanks

 

[Dan Robinson]

Your installer can get a plume manegement kit.

 

[soundant]

Hi Dan.

Does this extend just the outlet or the inlet too? And is it a generic kit or Biasi supplied?

Many thanks for your advice.

 

[soundant]

Found this

https://www.screwfix.com/p/biasi-ad...Vw_ZRCh2iZwUPEAYYASABEgLr3PD_BwE&gclsrc=aw.ds

Is this DIY or strictly a boiler engineer job?

Thanks again

 

[MeldrewsMate]

The flue forms part of the gas system, its fitting is controlled by Building Regulations AND the Gas Safety Regulations, so must only be performed by a registered gas fitter (Gas Safe Registered)

 

[Dan Robinson]

Definitely not a diy job.

 

[soundant]

Understood - Thanks again both.