Fuse removal tool

[333rocky333]

Getting Fuses out of spurs/fcu's, I used to always use a screwdriver but twice recently chipped them.
Recently see a tool designed for plumbers, that looked plastic and it levered them out.
Anyone seen them for sale or any better ways of getting them out

 

[flameport]

CEF have them, and the fact they are only supplied in packs of 4 suggests breakage and failure is a frequent event.

 

[Deleted member 267285]

CEF have them, and the fact they are only supplied in packs of 4 suggests breakage and failure is a frequent event.

I have them (won them in a competition) they sent 4, thinking why would I need 4, turns out one snapped as I was trying to remove a fuse. They are good when the fcu is tight against a boiler, but I found the only way I could get one out once was to undo the 2 screws, let it drop forward and do it that way.

 

[conny]

I've got a short, flat bladed, screwdriver which I heated up with a small blowtorch and then bent the tip at right angles in a vice.
Works a treat and had it for about 20+ years.