garage panels render etc

[christopher abbott]

hi al i have a old garage and the metal bars have started coming through,i am going to mesh it up do you think i can get away with a render gun i want a rough finish i dont need a scratch cut anyhelp thanks
I do have a compressor which should keep up with it
https://www.ebay.co.uk/itm/Air-Stucco-Cement-Plaster-Texture-Hopper-Mortar-Sprayer-Gun-Plastering-Tool/122637593249?ssPageName=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649

 

[KenGMac]

christopher abbott, good evening.

Note this is your first post in here?

Any chance you could post a few images please?

Sounds like you have a Marley type detached garage, and the reinforcing has begun to show its age, with the reinforcing exploding through the surface of the panels?

Ken.

 

[christopher abbott]

hi ken tried to upload pic they are to big, yes the bars have exploded to the surface, thats why i should mesh the panels up

 

[KenGMac]

christopher abbott, good evening again.

Sorry in delay in reply, had a competition to look after.

OK understand about "large images" 3 possible solutions?
1/. Make sure you are selecting one image for upload?
2/. Adjust your camera settings down in size and re-take the images [if possible please?]
3/. If you have access to Windows movie maker, in there you can import the image, and re-size it there to an image size for e mail.

If that does not work or you cannot be bothered, can you give a description of areas involved and te number of reinforcing bars exposed and reuting?

Cheers.

Ken