Hi, after flushing, my cistern continues to fill to about a cm above the overflow pipe before the water goes down level with the overflow and stops refilling. I guess that means its not shutting off quick enough, but does that mean a faulty syphon unit or faulty float valve?
Geberit dual flush
- Thread starter Smudge22
- Start date
-
- Tags
- dual flush geberit overflow syphon
Sponsored Links
It is not reaching the overflow level, so it is closing.
If you would like the valve to shut off, with less water fill, then it can be adjusted.
If you would like the valve to shut off, with less water fill, then it can be adjusted.
O/P says the water is rising about 1cm ABOVE the overflow before dropping back down to the overflow level and then shutting off.
If it can rise above the O/F by 1 cm then it seems it would not be able to cope if the valve didn't eventually shut off.
Depending on the float chamber style you can move them along the plastic arm so it shuts off earlier. Maybe by adjusting this it may prevent the water reaching the overflow top.
If it can rise above the O/F by 1 cm then it seems it would not be able to cope if the valve didn't eventually shut off.
Depending on the float chamber style you can move them along the plastic arm so it shuts off earlier. Maybe by adjusting this it may prevent the water reaching the overflow top.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links