Hafele soft-close clip on concealed hinges

[lymmranger]

Hi Experts...

just been to screwfix and bought the above hinges

(Autumn catalogue page 216 code 9205j)

cannot find spec sheet for this item (should have got Blum!!!!)

can anyone tell me....

distance from door edge to centre of 35mm hole

also

distance from cabinet edge to mounting plate screws

hope questions make sense

thanks in advance

 

[JohnD]

£2 will get you one of these
http://www.ebay.co.uk/itm/131433371952?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT

I believe Screwfix sell them but I can't find the listing

The Blum and Hafele measurements will be the same (it's standardised)

 

[lymmranger]

Thanks John

......will look into this in the morning

 

[lymmranger]

OK - for your info

John that "item" does exactly what it says on the tin!!!!

.....thank you

 

[Thepenetrator1]

It's usually 5mm from the edge of door to edge of 35mm hole so if you mark out a line 22.5mm this should give you your 5mm plus your 17.5mm (half of your 35mm) bang on to the centre. The measurements to your screw centres depend on your type of hinge, overlay, inset etc. It's usually 38mm or 56mm if I remember correctly on an 18mmm door. Cheers

 

[chappers]

all the data sheets are on the hafele website. giving all dimensions for all door thicknesses including margins etc.