Harton Unvented Cylinder

[ACOperson]

Hi all, anyone come across one of these unvented cylinders recently? Its a Harton-Cosybug 'budget indirect unvented' unit, installed around 1998. I need a combination valve for it and was wondering if parts are available for them.

Cheers

Paul

 

[Agile]

Never seen one!

But you might find what you need at:-

www.hartons.co.uk

Tony

 

[ACOperson]

Yes thats them. Going to A10 tomorow morning, will try there.....

 

[chrishutt]

The combination valve is probably manufactured by someone else anyway - can you see any identifying marks on it? I can't see that it would matter if you used a different combination valve anyway, providing the downstream pressure was adequately limited and the expansion valve opening pressure was as the original and below that of the T&P relief valve.

 

[ACOperson]

Found out that Harton-Cozybug do not manuafacture unvented cylinders or parts for their old ones anymore. My boiler spares shop has ordered some third party parts which should do the job.

 

[bob1960]

i have found this company very helpful when getting unvented parts.
no online ordering or lists but real professional phone service.
www.ewh.co.uk
[email protected]
have sizes like diameters thread types.temp range.pressure range at hand.name of unit etc.[/url]

 

[elemoine]

Hi bob1960. I've a similar Harton Cosybug with pressure vessel problems. Took up your recommendation and rang EWH. Fantastic service. Many thanks for that recommendation.
ELeMoine

 

[petit_pablo]

For anything unvented use these guys

http://www.advancedwater.co.uk/

 

[CBF]

& of course you all have the G3 cert to work on these don't you ?

 

[Dan Robinson]

And time machines