Help needed identifying flexi hoses

[steshaw74]

Hello

I (kind of) know what I need but am looking for help from folks here to advise me whether such flexi's exist.

Bath mixer: I need a 2 flexi's - 1 monobloc end and the other end needs to screw on to a 22mm isolating ball valve.

Shower thermostatic mixer: 2 flexi's needed. 1 end to screw on to 22mm isolating ball valve. The other end needs to screw on a fitting that I don't know the name of! There's 2 of them that screw into the shower mixer - the 2 ends are offset so that you can position correctly I assume.

Do such flexi's exist.

Thanks in advance

 

[seco services]

Bath mixer: I need a 2 flexi's - 1 monobloc end and the other end needs to screw on to a 22mm isolating ball valve.

what size their are two sizes for a monobloc tap.

Shower thermostatic mixer: 2 flexi's needed. 1 end to screw on to 22mm isolating ball valve. The other end needs to screw on a fitting that I don't know the name of! There's 2 of them that screw into the shower mixer - the 2 ends are offset so that you can position correctly I assume.


Thanks in advance

i wouldn't use flexis on a shower mixer if its concealed.

 

[steshaw74]

Bath mixer: I need a 2 flexi's - 1 monobloc end and the other end needs to screw on to a 22mm isolating ball valve.

what size their are two sizes for a monobloc tap.

Shower thermostatic mixer: 2 flexi's needed. 1 end to screw on to 22mm isolating ball valve. The other end needs to screw on a fitting that I don't know the name of! There's 2 of them that screw into the shower mixer - the 2 ends are offset so that you can position correctly I assume.


Thanks in advance

i wouldn't use flexis on a shower mixer if its concealed.

The Bath mixer is a 10mm monobloc.

Yes, the shower plumbing is concealed. What would you recommed......coonecting the plumbing straight to the shower mixer with a compression joint?
Any idea what that fixing is that I don't know the name of?
Cheers

 

[seco services]

just use a section of copper pipe and join to your isolation valve.

yes connect with copper and compression fitting or m/f iron etc

have you a pic of the mixer your fitting ?
make/model.

 

[steshaw74]

just use a section of copper pipe and join to your isolation valve.

yes connect with copper and compression fitting or m/f iron etc

have you a pic of the mixer your fitting ?
make/model.

The link to the screwfix flexi is for 15mm, it's 22mm that I need.

Will do re shower.

 

[seco services]

you'll have to try the plumbers merchants etc for them then.