I moved into a new house 18 months ago and was only given the code to set the alarm when leaving the house or going to bed. The alarm panel is now flashing bf and the fault and service light is illuminated. Every 10/15 minutes the internal alarm is going off until i enter the alarm code. Does anyone know how to disable the alarm? I'll call an engineer tomorrow, but don't want to be up all night before then!
HELP REQUIRED Modern Security Systems Series 3200
- Thread starter dontkonwalarms1
- Start date
Sponsored Links
I should have said a new home. old alarm system
A
Alarm
Scantronic 9800 System. (Red LED Keypad?, That was a question to confirm).
You need a 7ah battery (12vdc).
Code and clear only works for a while.
It may be on "engineer reset" so you will need one or a manual.
You need a 7ah battery (12vdc).
Code and clear only works for a while.
It may be on "engineer reset" so you will need one or a manual.
Sponsored Links
All resolved! thanks
A
Alarm
And the issue was?
Another one hit wonder.
Could have assisted others in a search...................
Another one hit wonder.
Could have assisted others in a search...................
The issue was the battery. You were correct!
I maybe a one hit wonder, but appreciate the response!
I maybe a one hit wonder, but appreciate the response!
A
Alarm
As your response was appreciated.
It shows the information given was correct.
Remember to change it every 5 years. And that panel will outlast you!!!
It shows the information given was correct.
Remember to change it every 5 years. And that panel will outlast you!!!
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
