HELP! Under Kitchen Cabinets

[puckacostello]

Hello all!
New Here and my first post a question!
I previously had fluro Tube lights under the kitchen Cabinets,
Now ive had new cabinets fitted and replacing them with LED Strips,

Ive had the fitters in and now im left with wires on the wall which i dont know is which,
There are two Points the wires come in and they are ran off the one switch,

Here is a poorly Drawn Picture Of what i see! Orange Being An Uninsulated Earth

//media.diynot.com/213000_212419_70282_91897113_thumb.jpg

So i have two Led Drivers One for each point the wiring comes in,

Ive FG L and N Outputs on the drivers,

Could anyone tell me which wires i have to double up?

Many thanks in advance!
Shaun

Untitled

• puckacostello
• 12 Dec 2013
• 1

 

[PrenticeBoyofDerry]

Do you have any information about the cables at the switch that you could disclose? Also do you have safe/approved test equipment?
Did the kitchen installer, also install these cables? If so, what documentation have they left you to identify the circuit, that it complies to BS7671 and is safe to energise?
If not who did and what evidence have they left you?
If it the original circuit when was it originally installed?

 

[Steve]

The wires could be anything, we need more info. Was there ever any switch at the lighting position? If so how did it operate?

 

[puckacostello]

Do you have any information about the cables at the switch that you could disclose? Also do you have safe/approved test equipment?
Did the kitchen installer, also install these cables? If so, what documentation have they left you to identify the circuit, that it complies to BS7671 and is safe to energise?
If not who did and what evidence have they left you?
If it the original circuit when was it originally installed?

The Switch is 2 Gang, One for the main lights, one for the under cabinet lighting,
The wiring was allready threre They had to take off the lights and wiring to remove the old cabinets,
Its the original And the house was built with it in 2006,

They where previously wired into Chocolate Circles? If thats what you call them

 

[puckacostello]

I may have a picture of how one side was wired before it was removed if this helps?

 

[puckacostello]

Untitled

• puckacostello
• 12 Dec 2013
• 1

This is the Right Hand Side Where The 2nd Sheeth Only has one wire The blue

It was wired in like so

Untitled

• puckacostello
• 12 Dec 2013
• 1