Help with ridge cap

[acg83]

Hi,

I have re roofed my garage which has a 15-20deg pitch with tiles at the front and a 10degree pitch the other side of the ridge. In re roofing I replaced cement fibre corrugated sheets with extra rafters laid on top of the old then osb and onduline corrugated sheets which sits higher than previously at the ridge.

I bought a dry ridge system but overlooked the fact that the 1/3 curve ridge tiles would now have to sit pitched forward. Also the centre of the liner will not be able to sit above the level of the new roof and give enough material to reach to the old tiles.

Any ideas on how to remedy this?

Thanks

 

[datarebal]

Get half round ridge, third rounds are hips really. Or possibly get some angle ridge/hip tiles and tilt them on their bed.