Hikvision DS-7608NI-K2/8P connectivity question

[dx90]

I want to connect 7 wired cameras to 7 of the 8 ports of the Hikvision DS-7608NI-K2/8P NVR.

Is it possible to connect an Ethernet cable from a wireless router to port 8 and use the wireless connection to connect to a wireless camera on port 8?

Will this work?

Thanks

 

[secureiam]

yes

 

[secureiam]

you can use a poe switch to connect a camera to a network, and as long as the NVR is connected to the same network you will be able to add it to the NVR

 

[dx90]

Brilliant. Do you know if I could get away with connecting 2 x wireless cameras on port 8 and will this NVR support more than 8 ip addresses?

Thanks

 

[secureiam]

No one channel one device

 

[secureiam]

you can have 8 remote channels ie nothing directly on nvr, as long as they are powered and connected to the same network

 

[dx90]

Do I have this correct?

If I wired 6 cameras from ports 1-6 I could then plug a rooter into port 7 and then be able to run 2 wireless cameras from that to the NVR which takes it up to the 8 channels.

 

[secureiam]

the only other issue if not a hik camera need to make sure the onvif is compatible,

 

[secureiam]

No

theres 8 camera ports
1 internet port

the internet port connects to the network
your cameras can connect to 1 of the 8 ports or you can find cameras on the same network as the NVR is plugged into

 

[secureiam]

http://www.netviewcctv.co.uk/media/...e5fb8d27136e95/d/s/ds-7608ni-i2_8p_1_1__1.png

 

[dx90]

Thanks for the link.

If I have 7 wired and one wireless camera do I plug the wireless router into port 8 or into the lan network port so I can have the wireless camera connect and record to the NVR?

Sorry about this I'm new to this type of cctv system.

Thanks

 

[secureiam]

LAN to router

in the admin you search for the ip address on port 8

 

[dx90]

Got you. Thanks for sticking with me on this. Much appreciated.

Thanks for your help.