I'm planning to build a new garage door to replace an old broken 'up and over' unit. As I don't use the garage for a car I don't always need a full width door. My plan is to make a three section door with one attached to the wall and the other two folding together on the other wall View media item 78433 like this.
Would these hinges http://www.screwfix.com/p/eclipse-g...k2/53184#product_additional_details_container be strong enough?
I want to have all of the hinges concealed rather than the usual t-hinge on the outside of the door which seems to be the usual.
I don't know yet how heavy the doors will be as I haven't made them yet. They will be made from a 50x100mm wooden frame with 25mm 'slats' fitted into a routered out groove. Each door will be around 700mm by 2000mm.
Would these hinges http://www.screwfix.com/p/eclipse-g...k2/53184#product_additional_details_container be strong enough?
I want to have all of the hinges concealed rather than the usual t-hinge on the outside of the door which seems to be the usual.
I don't know yet how heavy the doors will be as I haven't made them yet. They will be made from a 50x100mm wooden frame with 25mm 'slats' fitted into a routered out groove. Each door will be around 700mm by 2000mm.
