Honda GV200 for the lawnmower. Water on the oil. How to flush and remove it?

[Jonny Vee]

All,

Sorry to bother you again.

Just realized the cover on my lawnmower has blown away at some point during the winter. I tried to start the engine but nothing. Removing the car I noticed that was full of water.

I checked the oil and came out white. Guess is full of water.

I removed all oil and put fresh one. got machine running for few minute but is still white. I did this twice and already wasted alot of oil with no result.

What's the right procedure to get engine cleaned up of that dirty oil

Thanks

 

[Burnerman]

Just flush and flush again really......but you could always fill the sump up with diesel, swish it around on the pull starter - plug out - (no starting) and save oil that way.
John

 

[Jonny Vee]

Just flush and flush again really......but you could always fill the sump up with diesel, swish it around on the pull starter - plug out - (no starting) and save oil that way.
John

Thanks John,

I will have a go with one flush of diesel and then oil